Alamo none - Manual (Page 89)

OPERATION
GRASS KING 03/09 Operation Section 4-3
© 2009 Alamo Group Inc.
OPERA
T
ION
1. Standard Equipment and Specifications
Cutting Width 62” or 74”
Cutting Capacity (Diameter) 1” maximum
Cutting Height Range 1/2” to 6”
Cutting Housing 10-Gauge Top and 5-16” End-Plates with Bearing Guards
Cutter Shaft 4-1/2” Diameter, 3/8” Wall
Cutter Shaft Bearings 1-15/16” Bore greasable,sealed,self aligning
Rear Roller 6” diameter, 1/4” wall, full length tube rated at 6,000 lbs.
Weight (Approximate) 62”-1720 lbs., 74”-1870 lbs.
Knife Pairs 62” - 36 Coarse Cut, 76 Fine Cut
74” - 36 Coarse Cut, 92 Fine Cut
Replaceable Skid Shoes Standard
Tractor HP Requirements Minimum 50-90 HP
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
(SGM-14)