Alamo none - Manual (Page 105)

OPERATION
GRASS KING 03/09 Operation Section 4-19
© 2009 Alamo Group Inc.
OPERA
T
ION
• Ensure rubber deflectors are in position and
not damaged. Replace worn, broken, and
missing sections immediately.
• Ensure the rollers are in good condition and
rotate freely.
• Inspect that all bolts and screws are in
position and are properly torqued.
OPS-F-0038
• Inspect the condition of the drive belts.
• Ensure the slip clutch is properly adjusted
and the friction plates are not frozen
together. Reference the Maintenance
Section for proper slip clutch maintenance.
• Ensure the slip clutch shield and drive belt
shields are in place and in good repair.
• Ensure the tractor PTO master shield is in
place, lowered and in good condition.
OPS-F-0039
• Check the oil level in tank and replenish if
needed. NOTE: Do not fill the tank with oil
above the level of the sight gauge.
Overfilling the tank with oil after initial filling
may result in oil being discharged through
the air filter on the top of the hydraulic tank.
• Perform scheduled lubrication as specified
in the maintenance section. OPS-F-0040