Spindle service procedure, Remove blade or pan, Remove hydraulic motor – Alamo none User Manual

Page 145: Remove spindle assembly from mower deck, Drain remaining lubricant from housing, Spindle service procedure -17, Maintenance

Text mode
Original mode

MAINTENANCE

GRASS KING 03/09

Maintenance Section 5-17

MAINTENANCE

Be certain to clamp or securely support the Spindle Housing and sub-assemblies to
prevent injuries to hands and feet due to inadvertent dropping or falling over.

Always wear safety glasses and gloves to prevent eye and hand injury when chiseling or
hammering on metal components. Hardened metal will chip un-acceptedly.

An assembled spindle housing is quite heavy. Use a hoist or get help to handle them safely.

Lift carefully and properly using your legs to lift - NOT YOUR BACK.

SPINDLE SERVICE PROCEDURE

02960553B and 02960553C
1.

Remove blade or pan.

Remove hydraulic motor.

Remove spindle assembly from mower deck.

Drain remaining lubricant from housing.