Brocade Enterprise Wireless LAN Antenna Specification Guide, Version 1.5 - Manual (Page 94)

82 Enterprise Wireless LAN Antenna Specification Guide
53-1001881-01
Configuring the AP 7131 Series Transmit Power
10
5. Select the System Configuration tab to define the access point’s country code and radio
configuration.
6. Select the Country for the access point’s country of operation.
The access point prompts for the correct country code on the first login. A warning message
also displays stating an incorrect country setting may result in illegal radio operation. Selecting
the correct country is central to legally operating the access point. Each country has its own
regulatory restrictions concerning electromagnetic emissions and the maximum RF signal
strength that can be transmitted. To ensure compliance with national and local laws, set the
country accurately.
NOTE
If the access point is a US supported model, the country code is automatically set to US.
7. Refer to the Radio Configuration field to define how WLAN and WIPS are supported by the
access point’s radio(s). Remember, the options available depend on the single, dual or three
radio model deployed. Apply your settings when finished with the updates.
TABLE 1 Radio Configuration
Radio Button Single Radio SKU Dual Radio SKU Three Radio SKU
2.4 GHz WLAN,
5.0 GHz WLAN
& Sensor Not Available Not Available Radio 1 WLAN,
Radio 2 WLAN,
Radio 3 WIPS
2.4 GHz WLAN,
& Sensor Not Available Radio1 WLAN,
Radio 2 WIPS Radio 1 WLAN,
Radio 2 WIPS,
Radio 3 WIPS