Brocade Enterprise Wireless LAN Antenna Specification Guide, Version 1.5 - Manual (Page 21)

Enterprise Wireless LAN Antenna Specification Guide 9
53-1001881-01
Chapter
2
Product Compatibility
To find the right antenna and accessories for your AP-5131, AP-5181, AP-7131, AP650 or AP300
(non-integrated antenna) deployment:
• Find your Brocade access point or access port model at the top of the chart (refer to the chart
on the following page). Follow that column down to find the antennas, cables and lightning
arrestors compatible with that model access port or access point. Write those part numbers
down.
• Follow the row antenna across the table to the columns for the lightning arrestors and cables
you wrote down to confirm that they compatible with the antenna you've chosen and determine
if an adaptor is required to connect the two selected parts.
NOTE
The product compatibility chart on the next displays a global compatibility matrix, and does not apply
to FCC USA specific compatibility. For information specific to FCC USA compatibility, see
“Antenna
suite summary” on page 11.
FCC/USA compatibility
The following displays Brocade’s FCC approved AP radio, antenna, cable and accessory
combinations for use in the United States: