beautypg.com

Wall mount installation using wall mount brackets – Brocade ICX 6450-C Compact Switch Hardware Installation Guide User Manual

Page 30

background image

Wall mount installation using wall mount brackets

NOTE
You need a #2 Phillips screwdriver, a hammer, and a drill for wall mount installation.

NOTE
When mounting the device on a wall, Brocade recommends that you mount the device with the port
side down.

To securely mount the ICX 6450-C device to a wall, use the rack-mount kit that can be ordered
separately from the device (Brocade Part Number: ICX6400-RMK). The rack-mount kit is not included
with the device. Brocade recommends that you wall mount the device with the port side down.

Complete the following steps to mount the device to a wall.

Wall mount installation using wall mount brackets

28

Brocade ICX 6450-C Compact Switch Hardware Installation Guide

53-1003081-01