beautypg.com

System status leds – Brocade ICX 6450-C Compact Switch Hardware Installation Guide User Manual

Page 15

background image

Port status LEDs (Continued)

TABLE 2

LED

Condition

Status

PoE/PoE+(1 - 4)

On/Green (right side)

The port is providing PoE or PoE+ power to a
connected device.

Off (right side)

The port is not providing PoE or PoE+ power.

100M/1GbE RJ45 ports(PD1/C1 -
PD2/C2, Slot 2)

Link/Act

On/ Flashing Green

The port is operating at 1 Gbps. Flashing
indicates the port is transmitting and receiving
user packets at 1 Gbps.

Off

A link is not established with a remote port.

100M/1GbE SFP ports(F1 - F2, Slot 3)

Link/Act

On/ Flashing Green

The SFP port is operating at 1 Gbps. Flashing
indicates the port is transmitting and receiving
user packets at 1 Gbps.

Off

A link is not established with a remote port.

System status LEDs

The figure below shows the location of the system status LEDs on an ICX 6450-C device.

FIGURE 6 System status LEDs on an ICX 6450-C12-PD device

1

System status LEDs

The table below lists the system status LEDs on an ICX 6450-C device and their corresponding
conditions and status.

System status LEDs

TABLE 3

LED

Condition

Status

PWR

(Power)

Green

Power source is the AC power supply and is
operating normally.

Amber

Power source is the PD ports and is
operating normally.

Off

Power supply off.

PD1 and PD2

Green

PD port source is PoE+.

System status LEDs

Brocade ICX 6450-C Compact Switch Hardware Installation Guide

13

53-1003081-01