Brocade VDX 6710-54 Hardware Reference Manual - Manual (Page 65)

Brocade VDX 6710-54 Hardware Reference Manual 47
53-1002390-08
Regulatory certifications
A
CAUTION
For a DC system, use a grounding wire of at least 14 American Wire Gauge (AWG). The 14 AWG
wire should be attached to an agency-approved crimp connector (Tyco 34120 or certified Lug),
crimped with the proper crimping tool and attached to the protective grounding lug, using a size
#6-32 screw and a star washer, on the chassis with the other end to building ground. Each DC-DC
power supply must have a separate grounding cable.
Regulatory certifications
Table 14 lists the regulatory compliance standards for which the Brocade VDX 6710-54 is certified.
Environmental regulation compliance
This section describes the “China RoHS” environmental regulatory compliance requirements for
the Brocade VDX 6710-54 switch.
China RoHS
The contents included in this section are per the requirements of the People's Republic of China-
Management Methods for Controlling Pollution by Electronic Information products.
TABLE 14 Regulatory compliance standards
Country Standards Agency certifications and markings
Safety EMC Safety EMC
United States Bi-Nat UL/CSA 60950-1
2nd Ed or latest ANSI C63.4 cCSAus FCC Class A and
Statement
Canada Bi-Nat UL/CSA 60950-1
2nd Ed or latest ICES-003 Class A cCSAus ICES A and Statement
Japan CISPR22 and JEIDA
(Harmonics) VCCI-A and Statement
European Union EN60950-1 or latest EN55022 and EN55024 TUV-GS CE marking
Australia, New Zealand EN55022 and CISPR22
or AS/NZS CISPR22 C-Tick mark
Argentina IEC60950-1 or latest “S” mark
Russia IEC60950-1 or latest 51318.22-99 and
51318.24.99 or latest GOST mark GOST mark
Korea KN22 and KN24 KCC mark Class A
China GB4943-2001 and
GB9254-1998 or latest GB17625.1-2003 or
latest CCC logo CCC logo
Taiwan CNS 14336(94) or latest CNS 13438(95) or latest BSMI mark BSMI mark