Brocade VDX 6710-54 Hardware Reference Manual - Manual (Page 47)

Brocade VDX 6710-54 Hardware Reference Manual 29
53-1002390-08
Brocade VDX 6710-54 management
4
Brocade VDX 6710-54 management
You can use the management functions built into the Brocade VDX 6710-54 to monitor the fabric
topology, port status, physical status, and other information to help you analyze switch
performance and to accelerate system debugging.
For information about upgrading the version of Network OS installed on your switch, see the
Brocade Network OS Administrator’s Guide.
You can manage the Brocade VDX 6710-54 using any of the management options listed in Table 5 .
TABLE 5 Management options for the Brocade VDX 6710-54
Management tool Out-of-band support In-band support
Command line interface (CLI)
Up to two admin sessions and four user sessions
simultaneously. For more information, refer to the Brocade
Network OS Administrator’s Guide and the Brocade
Network OS Command Reference Guide. Ethernet or serial
(console port)
connection In standalone mode
only. Not available in
VCS mode.
Standard SNMP applications
For information, refer to the Brocade Network OS MIB
Reference. Ethernet or serial
(console port)
connection N/A
Brocade Network Advisor
For information, refer to the Brocade Network Advisor
SAN+IP User Manual. Ethernet (preferred)
or serial (console
port) connection N/A