Anthro Elevate Original Single Surface Assembly Instructions - Manual (Page 6)

6 Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
STEP 9
Insert End Caps
¡ Pop end caps into cross bar and base tubes.
Use the mallet to set them into place.
End Cap
STEP 8
Attach Cross Bar
¡ Using the keypad, move shelf all the way up. (Check
the legs for excess lubricant and wipe down if needed.)
¡ Align the cross bar so that the tapered ends of the
cross bar brackets line up with the leg brackets. Using
the mallet, drive the cross bar completely into place
(a few whacks on the left, a few on the right, then left,
then right…).
Cross Bar