beautypg.com

Step 3, Step 4 – Anthro Utility Bench II Assembly Instructions User Manual

Page 4

background image

4

Questions? Call us at

800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!

STEP 3

Add the Cross Tubes

NOTE: This is a 2-person step. One person holds the

Cross Tubes while the other drives the Cap Screws.

¡

Position the Right Leg Assembly (from Step 2) with

two Cross Tubes as shown. Insert one Bench Cap Screw

with a Curved Washer through a side hole, carefully

threading the Screw into the Cross Tube.

¡

Repeat for the remaining three side holes.

STEP 4

Determine the Shelf Height

¡

These instructions will place the Shelf at 35" above

the floor (with the 5" casters). The holes along the Leg

Assemblies are spaced at 1" increments. Adjusting one

hole down on the Leg Assembly will make the Shelf

34" above the floor.

NOTE: The Shelf height can be adjusted later if

needed; steps 5-8 will need to be disassembled

and reassembled again.

Bench Cap Screw

325-5166-00

Curved Washer

225-3522-00

35"

Cross Tubes