Stuart Turner Techflo TP 60TNH - Manual (Page 6)

- 6 -
Cont ...
2 LOCATION - SINGLE PUMP
Cold water connection:
2.27
The cold water supply: The supply must be AIR FREE and have a
DEDICATED CONNECTION to the tank which should be via a tank connector,
positioned at a slightly lower level (25 mm minimum) than the feed pipe to the hot
water cylinder.
Do not connect to the mains.
2 LOCATION - TWIN PUMP
Negative Duty Single Pump System
Fig. 3
Max. static inlet pressure
6
m
Negative Duty Twin Pump System
Fig. 4
Max. static inlet pressure
6
m