Stuart Turner Monsoon U1.5 bar Twin - Manual (Page 12)

- 12 -
The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
4.21 Wiring Diagram:
4.22 Fuses: The following fuse size should be used with the appropriate pump.
4.23 Supply Cord Replacement:
The supply cord and internal wiring within the terminal box are
routed and secured to ensure compliance with the electrical
standard EN 60335-1. It is essential that prior to any disturbance
of this internal wiring, all cable routing and securing details are
carefully noted to ensure re-assembly to the same factory pattern
is always maintained.
If the supply cord is to be changed or is damaged, it must be replaced with a
special cord assembly available from Stuart Turner or one of their approved
repairers.
On disassembly note the cord retention and routing system. Re-assemble to the
same pattern.
For information on cable connection consult the wiring diagram and cable gland
fitting instructions.
Model Fuse Size (AMPS)
U4.0 bar Twin
13
U4.5 bar Twin
All other models 5
MAIN WINDING
THERMOTRIP
CAPACITOR
START WINDING
FLOWSWITCH
REED (S3)
LINK WIR
E
(BLUE)
BROW
N
BLAC
K
GREEN / YELLOW
BLUE
BROWN
L
S2 S3 S3 S2
E
N 230 VAC/1PH/50Hz
SUPPLY
BLUE
N A M N L
S1 S1
FLOWSWITCH
REED (S2)
PRESSURE
SWITCH (S1)
Fig. 11