Yokogawa DAQWORX - Manual (Page 32)

2-17 IM WX83-01E
Monitoring with
AddObserver Panel
1
2
3
App1
App2
Index
2.11 Operating Temperature Controller Parts
The temperature contoller is a GateCONTROL-specific object. The objects and channels
assigned using the models set in GateCONTROL are different, and only existing
channels are displayed. Temperature controller parts consist of numeric out, selectable
out, alarms, digital meters, and other objects, and clicking numeric out displays a dialog
box from which you can edit or send values.
Procedure
1. Click a component object of the temperature controller part created in
AddObserver builder.
If you click a temperature controller part in AddObserver panel whose direct
output property was turned OFF in AddObbserver Builder, the following dialog box
appears. Enter a setting and click the Send button.
If you click a temperature controller part in AddObserver panel whose direct output
property was turned ON in AddObbserver Builder, the dialog box is not displayed,
and the display area of the temperature controller part becomes a numeric input
screen.
Loop switching button
Enabled when there are
multiple loops
PID number
AUTO/MANUAL, or
AUTO/MANUAL/CASCADE
PV value
PV events
TIME events
Program time
Segment number
Pattern number
SP/OUT display button
Switches between existing
SP values and OUT values
One from the following list is displayed here:
RESET, PROGRAM, LOCAL, RESET, PRGRM1,
PRGRM2, CASCADE, LOCAL, RELEASE, HOLD,
ADVANCE, ADV.EXEC.
When sending the ADVANCE command, select ADV.EXEC.
One from the following list is displayed here: LP1.SP, LP1.OUT,
LP1CLUT, LP1.HOUT, LP2.SP, LP2.OUT, LP2.COUT, LP2.HLUT.
AUTO/MANUAL or AUTO/MANUAL/CASCADE
RUN/STOP
OPEN/CLOSE
SP number
REMOTE/LOCAL
For the UP750
For the US1000 For the UT750