Yokogawa DAQWORX - Manual (Page 15)

1-9 IM WX83-01E
Before Using the Software
1
2
3
App1
App2
Index
1.3 Connecting to the Monitor Server
To use the functions of this software, it is necessary to connect to either the DAQ32 Plus,
DAQEXPLORER, DAQLOGGER, or MXLOGGER monitor server and GateEye. Connect
to the server you will be using, then proceed to chapter 2, “Using the AddObserver
Panel.”
Procedure
For DAQ32 Plus
1. Start DAQ32 Plus. For details, see section 2.1, “Launcher Software” in the
DAQ32 Plus User’s Manual (IM DP320-61E).
2. Start the logger software. For details, see section 5.1, “Operating Logger
Software” in the DAQ32 Plus User’s Manual (IM DP320-61E).
3. Start the monitor server. For details, see section 5.16, “Using the Monitor Server”
in the DAQ32 Plus User’s Manual (IM DP320-61E).
For DAQEXPLORER
Start DAQEXPLORER R2.03 or later (DAQ Desktop). For details, see section 2.1,
“Starting and Exiting the DAQ Desktop” in the DAQEXPLORER User’s Manual (IM
04L02A01-62E).
For DAQLOGGER
1. Start the DAQLOGGER. For details, see section 2.3, “Starting DAQLOGGER” in
the DAQLOGGER User’s Manual (IM 04D05C01-62E).
2. Start the monitor server. For details, see section 2.12, “Setting Up the Monitor
Server” in the DAQLOGGER User’s Manual (IM 04D05C01-62E).
For MXLOGGER
1. Start the MXLOGGER. For details, see the MXLOGGER User’s Manual (IM
WX103-01E).
2. Start the monitor server. For details, see the MXLOGGER User’s Manual (IM
WX103-01E).
For GateCONTROL
Start the GateCONTROL. For details, see the GateCONTROL User’s Manual (IM
WX1-07E).
For GateEye
Start the GateEye. For details, see the GateEye User’s Manual (IM WX1-01E).