Yokogawa DAQWORX - Manual (Page 7)

IM WX1-01E
1. Product Overview
GateEye is a software program that operates via Ethernet to acquire image data from
network cameras and Yokogawa’s DX, MV, and CX series instruments, and distributes
those images to clients on the network. GateEye does not store image data. This
manual explains how GateEye acts as a client to acquire image data from networked
devices (cameras and Yokogawa DX, MV, and CX series instruments), and acts as
the server to distribute those images to other clients. GateEye allows you to enter
connection settings for downloading images from a server, and view connection settings,
image data client information, and server information. Settings for distributing images
must be entered on each individual client.
VIEW RECORDER VR200
AddObserver
GateEye
Network camera, DX/MV/CX (snapshots)
Up to 4 units can be connected
Client software
Up to 16 units can be connected
Yokogawa’s AddObserver
or other clients
Acquires image data
Requests image data
Distributes image data*
* The data that can be distributed
is limited to 128 kB.
Client software
Client software
Protocol: HTTP (1.0 or later), dedicated
DX/MV/CX communication comman
Protocol: TCP/IP
Specifications for image acquisition and distribution are as follows:
Acquisition Function
Max. no. of servers: 4
Protocol: HTTP (1.0 or later), dedicated DX/MV/CX communication
commands
Image format: JPEG,PNG
Connection example: Network camera (able to take JPEG images, and supports
URLs. Panasonic KX-HCM1, Yokogawa FGC21 etc.), DX/MV/
CX (snapshots)
Distribution Function
Max. no. of clients: 16
Protocol: TCP/IP
Client example: YOKOGAWA AddObserver RMPanel
Image size: 640 × 480 dpi recommended.
GateEye imposes a limit of 128 Kbyte per image data file. If
files larger than 128 KB are sent, parts of the data will be lost.
Screen size: 640 × 480 dpi recommended. GateEye imposes
an upper limit of 128 kB per image data file. If files larger than
128 KB are sent, parts of the data will be lost.