Numbers, Connecting to a target device, Closing the connection – Yokogawa DAQWORX User Manual

Page 12

IM WX1-01E

Connecting and Disconnecting Communication
with a Target Device, and Entering Port
Numbers

Connecting to a Target Device

You can open a connection for communications with a particular device on the network,

then begin downloading images.

Choose Comm. > Connect from the menu bar.

Note

When distributing image data, set the software that will act as the client.

Closing the Connection

Choose Comm. > Disconnect from the menu bar.

All connections are cut.

Entering the Port Number for Connection with the Client

Generally you do not need to change these numbers. Change only if the initial values

are not appropriate for your network. When changing settings, enter values that are

allowed on your network, and that match those on your server. The default value is

50290.

Choose Comm. > Port No. from the menu bar.

The Port No. dialog box opens.

Enter the port number.

Note

The new port number setting will take effect the next time you start the instrument. Restart the

software to activate the new settings.