Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 6)

6 IM 04L31A01-05E
• If you selected [Separate] for Event output setting in Basic Control Settings
On the CX1000
Press the keys in the following sequence:
MENU key (switch to the setting mode (control)) > #7 soft key (select [Program-
control parameters]) > #6 soft key (select [Event output setting])
From the operation display, use the above keys to open the following display.
• If you selected [Common] for Event output setting in Basic Control Settings
• If you selected [Separate] for Event output setting in Basic Control Settings
Setup Procedure
1. Use the arrow keys to move the cursor (blue) to the item box you wish to change.
A soft key menu is displayed at the bottom of the display.
2. Press the soft key corresponding to the value you wish to select.
The box for the item you changed turns yellow, and the cursor moves to the next item.
3. Repeat steps 1 and 2 to change the value of all the items you wish to change.
4. Press the DISP/ENTER key to confirm the changes.
The boxes for the items you changed turn from yellow to white, and the cursor
returns to the first item box.
Operations on the CX1000/CX2000