Yokogawa Value Series FX1000 - Manual (Page 26)

25
IM 04L21B01-02EN
Saving the Setup Data
The following procedure is for FXs that have a CF card slot (suffix code -4.)
In this example, we will save the setup data to a file named “SF2” on the CF card.
1. Display the operation mode screen.
2. Press MENU once to display the setting menu.
3. Press the right arrow key once to select the File tab.
4. Press the down arrow key four times.
Select Save settings.
5. Press DISP/ENTER once.
6. Press the Input soft key once.
7. Enter “SF2” for the file name.
For the input procedure, see “Entering Values and Characters” on page 15.
8. Press DISP/ENTER once. The message “Data are being saved to media”
appears, and the setup data is saved.
9. Press ESC or MENU twice to return to the operation mode screen.
Operation complete.
Setting the Functions and Operations