Yokogawa Value Series FX1000 - Manual (Page 10)

9
IM 04L21B01-02EN
FX System Configuration
The FX can be used to configure a system as shown below.
Referenced sections are of the FX1000 User’s Manual (IM 04L21B01-01EN.)
Ethernet
Sec. 3.5 to 3.8
Serial
communication*
RS-232, RS-422A/485
Transmitter power supply *
PC
PLC
PC
FX
Recorder Temperature
controller
FAIL/status output *
Sec. 2.9
Sec. 2.10
Signal input
Sec. 3.3
Pulse input *
Sec. 3.10
Sec. 7.1
AC voltage and current *
Sec. 3.12
Logarithmic DC voltage *
Sec. 3.13
Sec. 2.11
*: Option
**: On FXs that have a CF card slot (suffix code -4.)
Communication Interface User’s Manual
(IM 04L21B01-17EN)
USB port*
Alarm output *
CF card **
USB flash memory
Keyboard
Remote input *
Keys
Terminology
• Memory sample
The operation of recording measured data.
• Memory start
The operation of starting memory sampling.
• Memory stop
The operation of stopping memory sampling.
• Display data
The waveform data shown on the FX display. The data recorded at the sampling
interval for the displayed data.
• Event data
Measured data recorded at a sampling interval separate from that of the display data.
• Manual sample
The operation of recording measured data (instantaneous value) manually.
Introduction to Functions