Yokogawa Value Series FX1000 - Manual (Page 19)

18
IM 04L21B01-02EN
Setting the Functions and Operations
The contents of the screens used in the explanations in the following operation example
may vary depending on the installed options and the FX settings.
Setting the Date/Time
In this example, we will change the date from the 1st to the 6th. After carrying out this
step, reset the time to the correct date/time.
1. Display the operation mode screen.
2. Press MENU once to display the setting menu.
3. Press the down arrow key once.
The cursor moves to Date/Time .
4. Press the right arrow key once.
Select Date & Time.
5. Press DISP/ENTER once to open the Time set window.
6. Change the date from 01 to 06.
Select the input position: Press the right arrow key five times to move the cursor in
the text box.
Enter the value: Press the up or down arrow key several times to display 6.
Enter the input: Press DISP/ENTER once.
Cancel the setting: Press ESC before pressing DISP/ENTER (entering the
input).
Display the Time set window.
(Display after entering 6)
7. Press ESC twice or MENU once to return to the operation mode screen.
Operation complete.