Yokogawa Removable Chassis DX1000N - Manual (Page 60)

Logging In, Logging Out, and Signing
2-21
IM 04L41B01-01E
1
2
3
Index
App
• Signing Data (Attaching approval information)
When in the historical trend display:
1. Press DISP/ENTER to show the display selection menu.
2. Use the arrow keys to select SIGNATURE.
3. Press the right arrow key to display the sub menu.
4. Use the up and down arrow keys to select SIGNATURE1, SIGNATURE2, or
SIGNATURE3, and then press DISP/ENTER.
The signature initiation display appears.
5. After checking the range of data that will be signed, select Yes, and press DISP/
ENTER.
When Process type is set to Continuous, the signature is attached to the data file
at the cursor display position. Use the arrow keys to move the cursor and change
the file to be signed.
Cursor (yellow line)
If the settings have been configured so that user IDs are used, a window for entering the
user ID opens. Proceed to step 6.
If the settings have been configured so that user IDs are not used, a window for entering the
password opens. Proceed to step 7.
2.3 Signing Display and Event Data