Yokogawa Button Operated DX2000 - Manual (Page 17)

16
4.2.3. Setting the Memory and Trend Clear Function
1. Press MENU (switch to the setting mode).
2. Select Timer, Event action > Event action.
3. Set the Logic box number , Event (set to Remote), and Remote number.
4. In the Action box, press the MemClear soft key.
Setup Screen Example for the Memory and Trend Clear Function (DX1000(N)
Example)
4.3. Communication Commands
The same command is used to control the display freeze function and memory and
trend clear function.
QB p1
¾ p1: Switch the screen operation and clear the memory (0 to 2)
• 0: Normal operation
• 1: Freeze the display
• 2: Clear the internal memory and trend display