Yokogawa EXAxt SC450 4-Wire Analyzer for Conductivity/Resistivity - Manual (Page 2)

Enter
Measurement setup
 Temperature settings
 Temp. Compensation
 Calibration settings
 Concentration
 Measure Conductivity only
Configure sensor
Commissioning
Note
This page may be referred to when
reading pages where subsequent
submenu screens are shown in
the text. Connection to the relevant
submenu screen is indicated by a
doted line with an arrow.
Note that screens in the text
are typical examples and actual
screens may differ depending on
the set parameters.
Connection to the relevant submenu screen
is indicated by a doted line with an arrow.