Yokogawa EJX530B - Manual (Page 89)

<11. General Specifications>
11-4
IM 01C27F01-01EN
11.3 Optional Specifications
 OPTIONAL SPECIFICATIONS (For Explosion Protected type)
Item Description Code
Factory Mutual (FM) FM Intrinsically safe Approval FS17
ATEX ATEX Intrinsically safe Approval KS27
Canadian Standards Association (CSA) CSA Intrinsically safe Approval CS17
IECEx IECEx Intrinsically safe Approval SS27
 OPTIONAL SPECIFICATIONS
Item Description Code
Painting
Color change Amplifier cover only P
Coating
change
Anti-corrosion coating *1 X2
Oil-prohibited use *10
Degrease cleansing treatment K1
Degrease cleansing treatment with fluorinated oilfilled capsule.
Operating temperature -20 to 80°C ( -4 to 176°F)
K2
Capsule fill fluid
Fluorinated oil filled in capsule
Operating temperature -20 to 80°C ( -4 to 176°F)
K3
Calibration units *2
P calibration (psi unit)
(See Table for Span and Range Limits.)
D1
bar calibration (bar unit) D3
M calibration (kgf/cm 2 unit) D4
Gold-plated diaphragm* 10
Inside of isolating diaphragms (fill fluid side) are gold plated, effective for hydrogen
permeation.
A1
European Pressure
Equipment Directive *11
PED 97/23/EC
Category III, Module H, Type of Equipment: Pressure Accessory-Vessel,
Type of Fluid: Liquid and Gas, Group of Fluid: 1 and 2.
PE3
Material certificate *3 Process Connector M15
Pressure test/
Leak test certificate *9
Test Pressure: 200 kPa (29 psi)* 4
Nitrogen(N
2
) Gas or Water *8
Retention time: one minute
T05
Test Pressure: 2 MPa (290 psi)* 5 T06
Test Pressure: 10 MPa (1450 psi)* 6 T07
Test Pressure: 50 MPa (7200 psi)* 7 T08
*1: Not applicable with color change option.
*2: The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and
D4.
*3: Material traceability certification, per EN 10204 3.1 B.
*4: Applicable for capsule code A.
*5: Applicable for capsule code B.
*6: Applicable for capsule code C.
*7: Applicable for capsule code D.
*8: Pure nitrogen gas or pure water is used for oil-prohibited use (option codes K1 and K2).
*9: The unit on the certificate is always kPa/MPa regardless of selection of option code D1, D3 and D4.
*10: Applicable for wetted parts material code S.
*11: Applicable for measurement span code D. If compliance with category III is needed, specify this option code.
 OPTIONAL ACCESSORIES
Product Part number Specification
Battery pack assembly F9915NQ Battery case, Lithium-thionyl chloride batteries 2 pieces
Batteries *1 F9915NR Lithium-thionyl chloride batteries, 2 pieces
Battery case F9915NK Battery case only
Remote antenna cable F9915KU 3 m with mounting bracket
F9915KV 13 m (3 m+10 m), with arrester and mounting bracket
Antenna F9915KW 2 dBi standard antenna
F9915KX 0 dBi antenna
F9915KY 6 dBi high gain antenna *2
*1: Alternatively, Tadiran SL-2780/S or TL-5930/S batteries can be purchased from your local distributor.
*2: Use of high gain antenna is limited by local regulation of radio and telecommunication law. Consult Yokogawa for details.