Yokogawa EJX530B - Manual (Page 88)

<11. General Specifications>
11-3
IM 01C27F01-01EN
11.2 Model and Suffix Codes
Model Suffix Codes Description
EJX510B
EJX530B
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
Absolute pressure transmitter
Gauge pressure transmitter
Output
signal
-L . . . . . . . . . . . . . . . . . . . . Wireless communication (ISA100.11a protocol)
Measurement
span (capsule)
A. . . . . . . . . . . . . . . . . . .
B. . . . . . . . . . . . . . . . . . .
C. . . . . . . . . . . . . . . . . . .
D. . . . . . . . . . . . . . . . . . .
8 to 200 kPa (1.16 to 29 psi)
0.04 to 2 MPa (5.8 to 290 psi)
0.2 to 10 MPa (29 to 1450 psi)
1 to 50 MPa (145 to 7200 psi)
Wetted parts
material * 3 S. . . . . . . . . . . . . . . . . .
H. . . . . . . . . . . . . . . . . .
Process connection Diaphragm Others
316L SST # Hastelloy C-276 *1# 316L SST #
Hastelloy C-276 *1# Hastelloy C-276 *1# Hastelloy C-276 *1#
Process
connections
4 . . . . . . . . . . . . . . . .
7 . . . . . . . . . . . . . . . .
8 . . . . . . . . . . . . . . . .
9 . . . . . . . . . . . . . . . .
1/2 NPT female
1/2 NPT male
G1/2 male *2
M20×1.5 male *2
─ N. . . . . . . . . . . . . . Always N
─ -0 . . . . . . . . . . . Always 0
Amplifier housing 7 . . . . . . . . . .
8 . . . . . . . . . .
9 . . . . . . . . . .
Cast aluminum alloy with integral antenna
Cast aluminum alloy with detachable antenna (2 dBi) *5
Cast aluminum alloy without antenna (N connector) *4*5
Electrical connection J . . . . . . . . . No electrical connection, battery-powered type (battery case only; battery
cells not included)
Integral indicator D. . . . . . . Digital indicator
Mounting bracket
►
F . . . . .
N. . . . .
304 SST 2-inch pipe mounting
None
Optional Codes /  Optional specification
The “►” marks indicates the most typical selection for each specification. Example: EJX530B-LAS4N-07JNN/o.
*1: Hastelloy C-276 or ASTM N10276.
*2: Not applicable for combination of capsule code D and wetted parts material code H.
*3: Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of
inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant
facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid
can contaminate the user’s process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite,
and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
*4: Order the antenna separately from accessary option.
*5: Remote antenna cables can be attached. Order separately from accessary option.
The ‘#’ marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use
of 316 SST material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for
details.