Watlow Series 935A - Manual (Page 63)

Watlow Series 935A User’s Manual 6 1
Configuration Menu
Prompt Range Default Hidden if * Your Settings
[`tA9] = [``C`];
or if
[`Ot2]
≠
[thM] or
[tMS]
0°F or 0°C [```0] [`999]
[```0] [`555]
[``)0] [99(0]
[``)0] [55%0]
If [Strt] = [rdYA] or
[`rdy], then select a
value in whole degrees
(0°F to 999°F or 0°C to
555°C) or in tenths of
degrees (0.0°F to
999.0°F or 0.0°C to
555.0°C).
[`rdY]
Timer Ready Band
[`tA9] = [``C`];
or if
[`Ot2]
≠
[thM] or
[tMS]
Immediate [IMd] [`rdY]
[rdYA] [PWr]
Choose Immediate,
Ready Band, Ready
Band Acknowledge, or
Power.
[Strt]
Start Timer Function
[`tA9] = [``C`];
or if
[`Ot2]
≠
[thM] or
[tMS]
Delay OFF [dLon] [dLoF]
[SGon] [SGoF]
Choose Delay ON, Delay
OFF, Signal ON, or Signal
OFF.
[tIM]
Timer Output Function
[`tA9] = [``C`];
or if
[`Ot1] and [`Ot2]
≠
[hEAt] or [cooL]
Bumpless [bPLS] [-100]
[`100]
Choose Bumpless
Transfer or Percent
Power.
[FAIL]
Input Failure Mode
[`tA9] = [``C`];
or if
[`Ot1] and/or
[`Ot2]
≠
[ALM]
no [``no] [`YES]
Choose YES for a
Silenced Alarm on start-
up or silencing during
operation.
[`SIL]
Alarm Silencing
[`tA9] = [``C`];
or if
[`Ot1] and/or
[`Ot2]
≠
[ALM]
no [``no] [`YES]
Choose YES for a
Latching Alarm.
[`LAt]
Alarm Latch