Watlow Series 734 Program - Manual (Page 11)

Operation, Chapter 4 11 WATLOW Series 733/734 Program Manual
Operation
Entering the Monitor Mode
The Monitor Mode displays the current set point(s), time, and events of an active
menu without interrupting the menu operation. If no menu is active, it displays
infromation from the last menu step which was running, or defaults to
Menu 1, Step 1.
• Press the Time key for 5 seconds.
• The display reads the current step [StP_] .
• Press the Time key , the display reads Zone 1's current set point [`325] .
• The Temperature key LED is lit. The Zone 1 LED is also lit if you have
a dual zone control.
• Press the Time key to advance to the next parameter. If you have a
dual zone unit, the Zone 2 LED is lit and the display reads the current set
point
[`350] .
• Press the Time key and the current step time is displayed [1!º6] .
• Press the Time key again and the event status is displayed [1010] .
• You can enter the Monitor mode whenever you are running a menu.
• To exit the Monitor mode, press any key.