Watlow Series 734 Program - Manual (Page 10)

Operation, Chapter 4
10 WATLOW Series 733/734 Program Manual
Operation
Running a Menu
Press the appropriate menu key 6 , that menu is activated. The LED's above the
Time key and menu key are lit. The time programmed for each step in the menu is
added together and begins counting down. Once the combined menu time is
complete, the audible alarm sounds and the menu LED flashes. Press the menu
key again to stop the audible alarm. If not, the alarm will sound for 15 seconds.
Before a menu can be started, menu time must be programmed.
Viewing Temperature While Running a Menu
• To view a menu's process temperature while executing a program, press the
temperature key .
• The display shows the temperature for Zone 1 [``80] .
• Press the Temperature key again and the Zone 2 process temperature is
displayed.
• Press the Time key to return to your menu countdown time.
Stopping a Menu
• To stop a running menu, press the active menu key.
• The display reverts back to [0)º0] .
• The 733/734 now controls at the temperature [``80] .
Entering The Review Mode
• Press the Temperature key for 5 seconds. You are in the Review mode.
When a menu is running, you will not effect the menus program status.
• The [nEnU] prompt is displayed. Press the menu to review.
• Press the Time key to cycle through the selected menu.
• To exit the Review mode, press any menu key. The control reverts to the last
active menu and/or step. To review more than one menu, exit the Review mode
and re-enter.
• After 1 minute with no key activations, the unit reverts to the Operation mode.