Watlow Series 734 Program - Manual (Page 6)

6
WATLOW Series 733/734 Program Manual Programming, Chapter 3
Program
1
10
7
4
2
11
8
5
3
12
9
6
To Advance To The Next Menu
• Press the TIME (clock) key .
The unit scrolls to the next menu and the corresponding menu LED is lit.
After menu 12, the unit exits the Program mode.
OR
Entering A Specific Menu
Press the appropriate menu key and the program is displayed. Continue
pressing the same menu key to advance to the next parameter in that menu.
For more information, see the following for the parameter listings.
Select Or Change Program Data Within A Menu
Use the UP/DOWN keys .
Exiting The Program Mode
• Press the last menu key (12) 12 .
• Press the TIME key . The display goes to the LOC parameter.
Select either:
0 All parameters can be changed.
1 Menu parameters can only be viewed, not changed.
• Press the TIME key again. You are back to the Operation mode [0)º0] .
Clearing Alarm or Error Codes
• Press the last menu key (12) 12 .
• Press the Time key . The display goes to the Ec or Ac parameter.
• Press the Temperature key to clear the error or alarm.
An error or alarm can only be cleared if the condition has been corrected.