Watlow Series 1500 - Manual (Page 2)

WATLOW Series 1500 User's Manual
2
blf1090
Use The Manual
This manual will make your job easier. Reading it and applying the information is a good
way to become familiar with the Series 1500. Here's an overview.
Introduction, Chapter 1, Page 4.
A Sample Program in Action, Chapter 2, Page 16.
Installation and Wiring, Chapter 3, page 26.
Technical Reference, Chapter 4, Page 40.
Calibration
Specification
Ordering Information
Technical Service
Glossary
Index
Quick Reference on Back Cover
Notes
This user's manual contains informational notes to alert you to important details. When you
see a note or note icon, look for an explanation in the margin.
Safety Information
This user's manual also has boldface safety information notes to protect both you and your
equipment. Please be attentive to them. Here are explanations.
(The Stop Sign or Lightning Bolt Sign in the wide text column alerts you to a "WARNING," a safety
hazard which could affect you and the equipment. A full explanation is in the narrow column on
the outside of the page).
(The Deer Crossing Sign or Exclamation Point Sign in the wide text column alerts you to a "CAUTION,"
a safety or functional hazard which could affect your equipment or its performance. A full explanation is in
the narrow column on the outside of the page).
Technical Assistance
If you encounter a problem with your Watlow control, review all of your configuration informa-
tion to verify that your selections are consistent with your application...Inputs, Outputs, Alarms,
Limits, etc. If the problem persists after checking the above, you can get technical assistance
by dialing: 1-507-454-5300
An Application Engineer will discuss your problem with you. Please have the following
information available when calling:
•
Complete model number • Serial Number
• All configuration information • User's Manual
The model and serial numbers can be found on the outside of the case.
Your Feedback
Your comments or suggestions on this manual are welcome, please send them to: Technical
Writer, Watlow Controls, 1241 Bundy Blvd., Winona, MN 55987, phone 507/454-5300, fax 507/
452-4507. The Watlow Series 1500 User's Manual and integral software are copyrighted by
Watlow Winona, Inc., © 1985, 1986, 1987, 1988 with all rights reserved.
∫
!
First...
Starting Out
Sample Program
Install/Wire
Programming
Appendix
Quick Reference
NOTE:
Details of a "Note"
appear here, in the
narrow box on the
outside of each page.
NOTE:
Details of a "Warning"
appear here, in the
narrow box on the
outside of each page.
!
NOTE:
Details of a "Caution"
appear here, in the
narrow box on the
outside of each page.
How to Use the Manual