Proface APL3000B - Node Box PC - Manual (Page 28)

Chapter 2 Specifications
2-5
2.1.2 Performance Specifications
„ Performance Specifications
CPU ULV Intel
®
Celeron
®
M (1GHz)
L2 Cache Memory Not installed
Main Memory 1Slot (Max.1GB) SO-DIMM socket 256MB to 1GB (PC2700)
Chipset Intel
®
855GME+ICH4
Graphic accelerator Built-in Intel
®
855GME
BIOS FirstBIOS Embedded Pro (Phoenix Technologies Co.)
Graphics VGA (640 x 480 pixels) to (1920 x 1080 pixels)
Video Memory Max.64MB (When using Windows
®
) UMA Type
Interface
Serial (RS-232C)
COM1 D-sub 9 pin (plug)
COM2
D-sub 9 pin (plug) (RS-232C/RS-422/RS-485 switch possible.
RI/+5V switch possible.)
Disk IDE I/F
Primary
*1
*1 To change the Master/Slave setting of Primary IDE I/F, set Serial Mode Select Switch
#9 pin on the circuit board to the desired position.
Master 2.5inch HDD I/F
Slave CF Card I/F
Secondary Master CF Card I/F
USB
USB 2.0 compatible front 4 ports
Connector: USB type A
Power Supply Voltage: DC5V±5%
Output Current: Each port: 500mA (max.), 4 ports total: 500mA (max.)
Maximum communication distance: 5m
LAN
Front 2 ports. This interface uses an RJ-45 type modular jack connector
(8 pins).
LAN1: auto change to 10BASE-T/100BASE-TX
LAN2: auto change to 10BASE-T/100BASE-TX/1000BASE-T,
corresponding to Wake On LAN feature
Sound
SPEAKER OUT
Front 1 port (A mini pin jack connector is used.)
Analog RGB Front 1 port. Mini D-sub 15 pin (socket).
PCI Rev.2.2 compatible PCI I/F (5V) side 1 Port
Clock Accuracy
*2
*2 The clock, RTC, built-in the PS-B has a timing error. The range if the error will be be-
tween +300 and -300 sec. / month, depending on the PS-B’s conditions such as life-
time usage or temperature difference. If you use the PS-B in a system where timing
is critical, adjust the clock at regular intervals.
±180 sec. /month (timing error depending on temperature and power-off)
SEE
‹
Switches (page 2-10)