SaltDogg SHPE2250 Series Electric Drive Poly Hopper Spreader - Manual (Page 8)

8
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (800) 841-8003
www.saltdogg.com
3020696 Rev. D
SHPE2250 SALTDOGG ® SPREADER
WARRANTY INFORMATION
This warranty replaces all previous warranties and no employee of this
company is authorized to extend additional warranties, or agreements,
or implications not explicitly covered herein.
Buyers Products Company warrants all parts of the product to be free
from defects in material and workmanship for a period of one (1) year.
Parts must be properly installed and used under normal conditions.
Normal wear is excluded.
Any part, which has been altered, including modifications, misuse,
accident, or lack of maintenance will not be considered under this
warranty.
The sole responsibility of Buyers Products Company under this warranty
is limited to repairing or replacing any part(s), which are returned,
prepaid, 30 days after such defect is discovered, and returned part(s) are
found to be defective by Buyers Products Company.
Authorization from Buyers Products Company must be obtained before
returning any part. The following information must accompany defective
parts returned to Buyers Products Company: RMA #, spreader model,
serial number, date installed, and distributor from whom purchased.
Buyers Products Company shall not be liable for damage arising out
of failure of any unit to operate properly, or failure, or delay in work, or
for any consequential damages. No charges for transportation or labor
performed on any part will be allowed under this warranty.
Repair Parts- Spreader Assembly
1
2
3
4
6 7 8
9
10 11
12 13 14
15
16
17
5
ITEM PART NO. QTY. DESCRIPTION
1
3019901 1 HOPPER ASSEMBLY SHPE2250
3025171 1 HOPPER ASSEMBLY SHPE2250. RED
3025173 1 HOPPER ASSEMBLY SHPE2250. YELLOW
2 3020655 1 CHUTE GUIDE WELDMENT
3 3019913 1 CHUTE ASSEMBLY SHPE2500
4 66050 4 SNAPPER PIN, 1/4X 2, YLW ZINC
5 3020697 1 HARDWARE KIT SHPE2250
6 3016934 1 CONTROLLER SPEED 1 2 VDC, 60 AMP
7 3016943 1 POWER CORD
8 3016944 1 WIRE HARNESS MAIN
9 203700 1 WIRE ASSEMBLY, 36 LONG
10 1496505 1 HOLD DOWN KIT, SPREADER (4 STRAPS)
11 — 4 SCREW, HHC 3/8-1 6 X 1 304 SST
12 — 4 NUT, NYLOCK 3/8-1 6X7/16 SST
13 — 4 WASHER, FLAT 3/8 USS SST
14 3020127 1 TARP SHPE2250
15 TS31 4 STRAP, RUBBER TARP 31"
16 9225 8 S-HOOK, 2.5" ZN, TARP STRAP
17 3008390 1 SCREEN, SHPE2000
Bill of Materials