Audiovox PPC-6600 - Manual (Page 86)

PPC6600 User Manual 84
Getting
Connected
PPC6600 User Manual 85
Getting
Connected
6 To start the connection, begin using the desired program. For example,
switch to Pocket Internet Explorer and browse a Web page. Your device
will automatically connect.
To change modem connection settings, in either My ISP or My Work Network ,
tap Manage existing connections . Select the desired modem connection,
tap Settings , and follow the instructions on the screen.
Set up a WAP gateway
To access WAP sites through Pocket Internet Explorer, configure your device to use a
WAP gateway. Use the following steps to create a new set of connections to the Internet
with WAP gateway settings.
1 Get the following information from your ISP :
ISP server phone number , user name , and password . Also, contact your
mobile phone service provider and ask for your WAP gateway server name
and port number .
2 Tap → Settings → Connections tab→ Connections → Tasks tab.
3 Tap Edit my proxy server . If a proxy server has not been set up, tap Set
up my proxy server .
4 For Programs that automatically connect to the Internet, tap New and enter
a name for the ISP connection.
5 On the Proxy Settings tab, select This network connects to the Internet
and This network uses a proxy server to connect to the Internet .
6 If necessary, in the Proxy server box, enter the proxy server name.
7 Tap Advanced .
8 In the WAP box, enter the WAP gateway server name. Under Port , enter
the port number. The most common WAP port number is 9201 .
9 Create a modem connection . Also, if necessary, set dialing rules .