Audiovox PPC-6600 - Manual (Page 100)

PPC6600 User Manual 98
Getting
Connected
PPC6600 User Manual 99
Getting
Connected
2 Tap New → Hands-free/Headset setup → tap Next .
Be sure that the Hands-free device you are trying to connect to is ready to
receive incoming connection requests. Please refer to the device's manual
for more information.
3 Follow the connection wizard instructions.
c. Setting up an ActiveSync via Bluetooth on your PPC6600
You can set up an ActiveSync partnership with a Bluetooth - enabled computer. First,
you need to set up the Bluetooth Configuration of your computer (follow the instruction
in the user manual of your Bluetooth device or PC), then setting up your PPC6600.
To establish an ActiveSync connection on your PPC6600:
1 From the Today screen → tap Bluetooth icon → Bluetooth Manager.
2 Tap New → ActiveSync via Bluetooth → Next .
3 Follow the connection wizard instructions.
Be sure the ActiveSync COM port setting on your PC is the same as the
COM port setting used for Bluetooth on your PC.
4 Follow the Bluetooth Browser screen, select the PC you want to
synchronize with → tap Next .
5 Under Serial Port Selection → select the name of the serial port for the
PC selected above → then tap Next → Finish.
d. Dial-Up Networking : Connect to Remote PC
Dial-up Networking (DUN) allows you to connect to a remote computer via a phone
line. Once connected, you can browse the Internet, check your e-mail, etc.
The remote Bluetooth device that will provide the Dial-up Networking service must
have access to a telephone system (either a hard-wired or cellular connection).
Devices that might provide the
Dial-up Networking service include:
n Bluetooth-enabled cellular telephones
n Bluetooth-enabled desktop computers that are attached to a telephone system
n Bluetooth modems.