Troubleshooting, Operating problems, Problem – Audiovox PPC-6600 User Manual
Page 163: Solution

Trouble shooting
PPC6600 User Manual
162
Trouble
shooting
PPC6600 User Manual
163
Troubleshooting
If you encounter any problems with your PPC6600, consult the following
Trouble Guide
.
If you are still having problems after reviewing these, contact
Technical Support
or your
dealer.
Problem
n
My PPC6600 keeps turning
itself off.
n
My PPC6600 is not making
any sound.
n
My PPC6600 does not
vibrate when the phone rings
or alarms occur.
n
Screen freezes or no re-
sponse
n
Screen is blank.
Solution
Your PPC6600 is designed by default to turn itself off if
not used for 3 minutes. This period can be set up to 5
minutes. Check the auto-off function on the
Advanced
tab on
Power
setting in
Chapter 5.
1
Tap at the right corner of title bar to check the
volume status.
2
Check the settings of
Sound and Notifications
on
the
Persona
l tab by tapping
→
Settings.
1
Tap in the right corner of title bar to check if the
vibrate function is activated.
2
Check the setting of
Sound and Notifications
on
the
Persona
l tab by tapping
→
Settings.
3
Check the event note in your
Calendar
to see if the
Reminder
has been activated.
Reset your device. See
Reset your PPC6600 and clear
memory
section in
Appendix
.
If your PPC6600 does not respond when you briefly
press the Power button, press and hold the button for a
full second. If that does not work :
1
Plug the AC power into the device to charge it.
2
Reset the device. See
Reset your PPC6600 and
clear memory
section in
Appendix
.
Operating Problems