Ramsey Winch RPH-8000Y (JERR-DAN) - Manual (Page 9)

INSTRUCTIONS FOR OVERHAUL OF RAMSEY WINCH MODEL RPH-8000-Y
DISASSEMBLY
Remove frame assembly (item #2) by unscrewing (8) capscrews (item #19). Remove breather plug
and reducer (item #35 & #40) from winch. Drain oil from winch by removing plug (item #41).
Remove motor (item #36), coupling (item #32) from winch by unscrewing capscrews (item #25). If
coupling is being replaced, be sure pin (item 42) is installed. Tap motor lightly to disengage.
Replace all o-rings and seals with new ones during re-assembly (order kit #246042). If necessary,
remove valve (item #50) from motor by removing capscrews (item #22) and lockwashers (item #53).
7