Asante Technologies 3624/48 - Manual (Page 34)

Chapter 5: Managing the System and Configuration Files
This chapter explains how to manage the system information, as well as how to manage the configuration files for
IntraCore 3624/48.
5.1 Managing the System
This section discusses the following tasks needed to manage the system information of the IntraCore 3624/48:
•
Setting the System Clock
•
Configuring the Host name
• Changing
the Password
•
Testing Connections with Ping Commands
•
Tracing Packet Routes
• Enabling
Syslog
• Displaying
the Operating Configuration
5.1.1 Setting the System Clock
The IntraCore 3624/48has a battery-backed system clock that is accurate even after a system restart.
To manually set the system clock, complete the following commands in privileged
configuration mode. Use a space and a question mark (?) to display the clock set
options. Save after configuring the clock by typing save at the switch# prompt.
Switch(Config)# sntp
daylight Enable or disable the daylight saving configuration
localtime Configure the local time
server
timezone
Switch(Config)# sntp localtime
enable Enable local time
localtime_date Set local time
Switch(Config)# sntp localtime localtime_date
<2007..2037> Enter year
Switch(Config)# sntp localtime localtime_date 2008 07 06 06 35 00
Switch(Config)#
34 Asante IntraCore IC3624/48 User’s Manual