Asante Technologies 3624/48 User Manual
Page 125
Mode Global Config
10.4.16 set commands
10.4.16.1 set IGMP
Configure IGMP snooping.
1) set igmp enable
This command enables igmp snooping.
Format set igmp enable
Mode Global Config
2) set igmp disable
This command disables IGMP snooping.
Format set igmp disable
Mode Global Config
3) set igmp last-memberquery
This command specifies last member query interval.
Format set igmp last-memberquery <1-200>
33
Mode Global Config
4) set igmp last-membercount
This command specifies last member count.
Format set igmp last-membercount <1-20>
Mode Global Config
5) set igmp query-interval
This command specifies igmp query interval
Format set igmp query-interval <10-600>
Mode Global Config
6) set igmp query-resinterval
This command specifies igmp query response interval
Format set igmp query-resinterval <0-200>
Mode Global Config
7) set igmp robustness
This command specifies robustness variable.
Format set igmp robustness <1-20>
Mode Global Config
8) set igmp router-port
This command specifies igmp router port.
Format set igmp router-port ports <port list>
Mode Global Config
e.g. Switch(config)# set igmp router-port ports 1-10
10.4.16.2 set igmp-querier
This command configures igmp querier.
Format set igmp-querier {enable | disable}
Mode Global Config
10.4.16.3 set igmp-proxy
This command configures igmp proxy.
Format set igmp-proxy {enable | disable}
Mode Global Config
10.4.16.4 set static-mcast
Configure static multicast.
1) set static-mcast name
Format set static-mcast name <WORD> add vid <vlan-ID> mac
<mac-addr>member port <port list>
Mode Global Config
2) set static-mcast name
Format set static-mcast name <WORD>delete
125
Asante IntraCore IC3624/48
User’s Manual