Asante Technologies 3624/48 - Manual (Page 131)

This command clears TCP/UDP destination port filter.
Format access-list name <WORD> clear l4port DST port
40
Mode Global Config
4) access-list name clear packet-type
This command clears packet type filter.
Format access-list name <WORD> clear packet-type
Mode Global Config
5) access-list name clear mac SA
This command clears a source mac address.
Format Access-list name <WORD> clear mac SA
Mode Global Config
6) access-list name clear MAC DA
This command clears a destination mac address.
Format Access-list name <WORD> clear mac DA.
Mode Global Config
7)access-list name clear VID
This command clears the 802.1Q VLAN tag of packet.
Format Access-list name <WORD> clear VID
Mode Global Config
8)access-list name clear ether-type
This command clears ether type filter.
Format access-list name <WORD> clear ether-type
Mode Global Config
10.4.23.4 access-list name deletes.
This command removes the ACL entry.
Format access-list name <WORD> deletes
Mode Global Config
10.4.23.5 access-list name {enable|disable}
This command enables/disables the ACL entry.
Format access-list name <WORD> {enable|disable}
Mode Global Config
10.4.23.6 access-list name set
1) access-list name set priority
This command specifies ACL entry priority.
Format access-list name <WORD> set priority <0-65535>
Mode Global Config
2) access-list name set IP-mode
access-list name set IP-mode SRC IP.
This command specifies a source IP address.
Format access-list name <WORD> set IP-mode SRC IP
<mask-addr>
Mode Global Config
access-list name set IP-mode DST IP
This command specifies a destination IP address.
41
Format access-list name <WORD> set IP-mode DSP IP <IP-addr>
<mask-addr>
Mode Global Config
3) access-list name set L4port
This command specifies the TCP/UDP port range.
access-list name set l4port SRC-port
This command specifies the source TCP/UDP port range.
Format Access-list name <WORD> set L4 port SRE-port from <1-65535>
to <1-65535>
Mode Global Config
131 Asante IntraCore IC3624/48 User’s Manual