Asante Technologies 3624/48 - Manual (Page 133)

Format arp static {add|delete} vid <1~4094> ip mac
Mode Global Config
10.4.25 dos Commands
Note: This commands only support on GG24 GIGABIT PORTS WITH 2
SHARED MINI-GBIC SLOTS/G44 GIGABIT PORTS WITH 4 SHARED
MINI-GBIC SLOTS L2 MANAGEMENT SWITCH/G48 100BASETX + 4
GIGABIT COMBO WITH 2 SHARED MINI-GBIC SLOTS LAYER 2+
MANAGEMENT SWITCH)
10.4.25.1 dos land
This Command enables and disables land-type attacks prevention.
Format dos land {enable|disable}
Mode Global Config
10.4.25.2 dos Blat
This Command enables and disables blat-type attack prevention.
Format dos blat {enable|disable}
Mode Global Config
10.4.25.3 dos SYN-fin
This Command enables and disables SYN-fin-type attack prevention.
Format dos syn -fin {enable|disable}
Mode Global Config
10.4.25.4 dos ports
1) dos ports Smurf
This command enables and disables Smurf-TYPR attack prevention.
Format dos ports smurf {enable|disable}
Mode Global Config
43
2)dos ports ping-flooding
This command enables and disables ping-flooding-type attack prevention.
Format dos ports ping-flooding {enable|disable}
Mode Global Config
3)dos ports SYNACK-flooding
This command enables and disables SYNACK -flooding -type attack
prevention. Set rate is 64 kbps or 128kbps for port lists (1, 3-5, 7-10.11)
Format dos ports synack -flooding {enable|disable} rate {64|128}
Mode Global Config
e.g. Switch#dos ports synack -flooding enablerate 64 1-4
Switch#dos ports synack -flooding enablerate 64 5
10.5 Interface Config mode commands
10.5.1 exit command
Exit current shell
Format exit
Mode Interface Config
10.5.2 dot1x command
Set 802.1x port control.
10.5.2.1 Set auto-authorized on ports
Format 802.1x port-control {enable|disable}
Mode Interface Config
10.5.3 Configure port lacp mode
10.5.3.1 admin command
Configure admin key of port
Format lacp admin <0 ..65535>
Mode Interface Config
133 Asante IntraCore IC3624/48 User’s Manual