ADTRAN 3000 - Manual (Page 112)

Appendix A. AT Commands and S-Registers
A-14 Express 3000 User Manual 61203153L2-20
S73 DTE Parity Selects the number of asynchronous parity bits.
0=None
1=Odd
2=Even
S74 DTE Stop Selects the number of asynchronous parity bits.
0=None
1=Odd
2=Even
S75 DTE Flow Selects asynchronous flow control.
0=None
1=XON/OFF from DTE controls DCE
2=XON/OFF from DCE controls DTE
3=Hardware
12=Software
S90 Conference ID NI-1 feature identification number for conferencing. See
the ISDN service provider for this ID.
S91 Transfer ID NI-1 feature identification number for transferring. See
the ISDN service provider for this ID.
S92 Message Waiting
ID NI-1 feature identification number for message waiting
indicator. See the ISDN service provider for this ID.
S93 Call Type
Routing Determines how incoming call is routed when connected
to a point-to-point ISDN line.
0=Route all call types to DTE
S94 Local Tones Forces the POTS interface to generate all tones.
Bit 0=0:In-band tones from ISDN switch (when available)
Bit 0 =1:All tones generated locally
Bit 1 =0: Warnings to POTS when unavailable
Bit 1 =1:Disable all warnings to POTS
S118 Chap Spoofing
Enable 32 = CHAP enabled (Windows 95/98 setting)
0 = CHAP disabled
S147 Raise Threshold 0 -100% (Default = 50%)
User selectable variables: 10, 20, 30, 40, 50, 60
S148 Lower Threshold 0 - 100% (Default = 30%)
User selectable variables: 10, 20, 30, 40, 50, 60
S149 Drop Time Default = 1 min
Increments of 30 seconds (S149 = 1 for 30 s)
User selectable variables: 30 s, 1 min, 2 min, 5 min
S-Registers List
(Continued)
Command Function Features