Ramsey Winch H-800 DOW-LOK - Manual (Page 3)

PLEASE READ THIS MANUAL CAREFULLY
This manual contains useful ideas in obtaining the most efficient opera-
tion from your Ramsey Winch, and safety procedures one needs to know
before operating a Ramsey Winch. Do not operate this winch until you
have carefully read and understand the "WARNINGS" and "OPERATION"
sections of this manual.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifications. Great
care and skill go into every winch we make. If the need should arise,
warranty procedure is outlined on the back of your self-addressed
postage paid warranty card. Please read and fill out the enclosed warran-
ty card and send it to Ramsey Winch Company. If you have any prob-
lems with our winch, please follow instructions for prompt service on all
warranty claims. Refer to back page for limited warranty.
NOTE: The rated line pulls shown are for the winch only. Consult
the wire rope manufacturer for wire rope ratings.
6,430
* These specifications are based on recommended wire rope of
** Fifth layer does not conform to SAE J706
Gear Reduction.......................................................................40:1
Shipping Weight: H-800 ..................................330 lb. (150 Kgs.)
Rated Line Pull (lbs.)...........................................................20,000
(Kgs.)................................................................9,060
16,600
7,510 per layer Kg. 9,060
*Cable capacity
*Line speed REFER TO CHART OF LINE SPEED VERSUS
M.
Ft.
10
35
22
75
*Rated line pull
LAYER OF CABLE
Lbs. 20,000
1 2
5,610 4,980
GPM ON PAGE 4.
180
54 38
125 240
72
12,400 14,200
3 4 5**
11,000
.63 inch (16 mm) dia. 6 x 19 extra improved plow steel
SPECIFICATIONS: Conforms to SAE J706
1