Ramsey Winch H 700 DOW-LOK W/ COUNTERBALANCE VALVE, LESS BRAKE - Manual (Page 3)

PLEASE READ THIS MANUAL CAREFULLY
This manual contains useful ideas in obtaining the most efficient operation from your Ramsey winch
and safety procedures one needs to know before operating a Ramsey winch. Do not operate this
winch until you have carefully read and understand the
“WARNINGS” and “OPERATION” sections of this
manual.
WARRANTY INFORMATION
Ramsey winches are designed and built to exacting specifications. Great care and skill go into every
winch we make. If the need should arise, warranty procedure is outlined on the back of your self-
addressed, postage paid warranty card. Please read and fill out the enclosed warranty card and send
it back to Ramsey Winch Company. If you have any problems with our winch, please follow
instructions for prompt service on all warranty claims. Refer to back page of this manual for limited
warranty.
SPECIFICATIONS
Rated Line Pull (lbs.)
20,000
(kg)
9,070
Gear Reduction
35:1
Shipping Weight: 258 LB
Layer of Cable
1 2 3 4 5**
(lbs.) 20,000 16,500 14,000 12,200 10,800 *Rated line pull per
layer
(kg) 9,070 7,480 6,350 5,530 4,890
*Cable Capacity (ft)* 20 50 85 125 170
(m)* 6 15 25 38 51
FPM
22 26 31 35 40
*Line speed H 700
(575 Worm RPM @ 30
GPM)
MPM
6,7 7,9 9,4 10,6 12,1
* These specifications are based on recommended wire rope of .56 inch (15mm) diameter
6x19 extra improved plow steel cable
Note: The rated line pulls shown are for the winch only. Consult wire
rope
manufacturer for wire rope ratings. ** Fifth layer does not conform to SAE J706
1