Ramsey Winch 800/H-800 DOW-LOK - Manual (Page 18)

16
(21)
Attach mounting angles (item #2) to winch assembly. Use
capscrews (item #47 & #48) and lockwashers (item #55).
Tighten capscrews to 290 ft. lb. (393 Nm) each. Insert plug
(item #63) into hole in bottom of gear housing. Remove
plugs (items #59 & 62) from top of housing. Pour 3 -3/4
pints of E.P. 140 oil into hole and replace plugs.
Check the action of the clutch by shifting and freespooling the
winch drum several times.
The shift pattern plate on top of the clutch housing is adjusted
at the factory to provide reliable shifting of the Dow-Lok®
clutch. If the plate should loosen or be removed, you must
readjust the plate. Shift the handle to disengage the clutch and hold against the internal stop. With the latching pin in the
"OUT" slots, push the shift pattern plate toward the cable drum. Unsnap plastic lever cover from pattern plate. Tighten the
four capscrews which hold the plate to housing. Snap lever cover back into place around the pattern plate.
62
59
47 55
2
2
48 55
63