Ramsey Winch 800/H-800 DOW-LOK - Manual

1
CAUTION: READ AND UNDERSTAND THIS MANUAL BEFORE INSTALLATION AND OPERATION
OF WINCH. SEE WARNINGS!
Ramsey Winch Company
OWNER’S MANUAL
MODEL 800 / H-800 SERIES
DOW-LOK® EQUIPPED
INDUSTRIAL LOW-MOUNT WINCHES
Rated Line Pull (lbs.) 20,000
(kg) 9,060
Gear Reduction 40:1
800 Y-800 H-800 HY-800
Shipping Weight:
315 lbs.
(143 Kg) 290 lbs
(132 Kg) 330 lbs.
(150 Kg) 325 lbs.
(148 Kg)
Layer of Cable 1 2 3 4 5**
(lbs.) 20,000 16,600 14,200 12,400 11,000
(kg) 9,060 7,510 6,430 5,610 4,980
*Cable Capacity (ft)* 35 75 125 180 240
800 / H-800 (m)* 10 22 38 54 72
*Cable Capacity (ft)* 20 45 75 110 150
Y-800 / HY-800 (m)* 6 13 22 33 45
*Line speed
Worm
RPM
FPM 22 27 32 35 40
MPM 6.6 8.1 9.7 10.9 12.3
FPM 18 22 26 29 33 460
MPM 5.4 6.6 7.9 8.8 10.0 30 GPM
** Fifth layer does not conform to SAE J706
Note: The rated line pulls shown are for the winch only. Consult wire rope
manufacturer for wire rope ratings
*Rated line pull per layer
570
* These specifications are based on recommended wire rope of .63 inch (16mm) diameter 6x19
extra improved plow steel cable
800
H-800
Congratulations
Ramsey Winches are designed and built to exacting specifications. Great care and skill go into every winch we make. If the
need should arise, warranty procedure is outlined on the back of your self-addressed postage paid warranty card. Please
read and fill out the enclosed warranty card and send it to Ramsey Winch Company. If you have any problems with your
winch, please follow instructions for prompt service on all warranty claims. Refer to back page for limited warranty.