beautypg.com

Maintenance, Warning safety precautions – Lincoln Electric IM10085 ACTIV8 User Manual

Page 31

background image

D-1

MAINTENANCE

D-1

ACTIV8™

ELECTRIC SHOCK can kill.

• Do not operate with covers

removed.

• Turn off power source before

installing or servicing.

• Do not touch electrically hot

parts.

• Turn the input power to the welding power

source off at the fuse box before working in the
terminal strip.

• Only qualified personnel should install, use or

service this equipment.

WARNING

SAFETY PRECAUTIONS

ROUTINE MAINTENANCE

Routine maintenance consists of periodically blowing
out the machine, using a low pressure airstream, to
remove accumulated dust and dirt from inside the
feeder. Check weld cables, control cables and gas
hoses for cuts.

PERIODIC MAINTENANCE

• Replace the drive rolls and inner wire guide when

they are worn.

• Blow out or vacuum the inside of the feeder.