Accessories – Lincoln Electric IM10085 ACTIV8 User Manual
Page 30
C-3
ACCESSORIES
C-3
ACTIV8™
K910-1
K910-2
K1500-1
Ground Clamp
Ground Clamp
Gun Receiver Bushing (for guns
with K466-1 Lincoln gun connec-
tors; Innershield and Subarc guns)
Includes: One 300 Amp
Ground Clamp.
Includes: One 500 Amp
Ground Clamp.
Includes: Gun receiver bush-
ing, set screw and hex key
wrench.
K484
Jumper Plug Kit
Includes: 14 pin circular
connector with jumper for
leads 2-4. For use in power
sources for turning the weld
terminals "ON" at all times.
K1500-2
K1500-3
K1500-4
K1546-2
K586-1
K283
Gun Receiver Bushing (for guns
with K466-2, K466-10 Lincoln gun
connectors; Magnum 200/300/400
guns and compatible with Tweco®
#2-#4)
Gun Receiver Bushing (for guns
with K613-7 Lincoln gun connec-
tors; Magnum 550 guns and com-
patible with Tweco® #5)
Gun Receiver Bushing (for gun
with K466-3 Lincoln gun connec-
tors; compatible with Miller® guns.)
Incoming Bushing for Lincoln
Conduit
Deluxe Adjustable Gas Regulator.
Wire Feed Speed Meter
Includes: Gun receiver bush-
ing with hose nipple, set screw
and hex key wrench.
Includes: Gun receiver bush-
ing with hose nipple, set screw
and hex key wrench.
Includes: Gun receiver bush-
ing with hose nipple, set screw
and hex key wrench.
Includes: Feed Plate Incoming
Bushings connect directly to wire
conduit (not included), for use in
boom system, long distances, or
large payoff packages. Bushings
can be used with any wire conduit
(K515 or K565). For 1/16-1/8 in
diameter wire.
NOTE: T10642-325 Flex Tube
Required with K1546-2
Includes: Deluxe Gas Regulator
for Mixed Gases, Adapter for CO
2
and 10' (3.0m) Hose.
Includes: A wire feed speed
meter with digital display.