IEI Integration RPC-6022G - Manual (Page 53)

RPC-6022GW Rackmount LCD Workstation
Page 53
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 1:
Step 2:
Step 3:
4.5.9 Install the PCI/ISA Expansion Card
To install a PCI expansion card or an ISA expansion card please follow the instructions
below.
Remove the slot cover retention screw to remove the slot bracket from the
chassis rear panel (Figure 4-12).
Remove two card bracket screws to remove the card bracket from the fan
bracket (Figure 4-12).
If necessary, remove the CPU card clamp. (See Section 4.5.2)
Slide the PCI/ISA expansion card into the reserved PCI/ISA socket on the
backplane.
To secure the PCI/ISA expansion card, reinsert the previously removed slot
cover retention screw and reinstall the card bracket. Step 0:
4.5.10 Installing Short Cards
When installed, some cards may still fall short below the CPU card bracket. To better
secure the CPU card or expansion cards, use the short card clamps that came with the
package.
Locate the screw hole on the CPU card bracket closest to the target card.
Adjust the short card clamp in a vertical direction until the rubber shock absorber
part of the clamp secures the expansion card.
Fasten a screw to secure the card clamp. Step 0: