IEI Integration UPC-12A_GM45 v2.10 - Manual (Page 46)

UPC-12A/GM45 Panel PC
Page 34
4.5 CF Card Installation
The UPC-12A/GM45 has one CF Type II slot. To install the CF card, follow the instructions
below.
Step 1: Locate the CF card socket . The CF card socket is located on the bottom panel
of the UPC-12A/GM45.
Step 2: Install the CF Card . Correctly align the CF card with the socket and insert the
CF card into the socket. See
537H537H537H537H537H537H537H539H
Figure 4-1 .
Figure 4-1: CF Card Installation
Step 3: To remove the CF card, push the eject button on the side of the CF card socket.
Step 0:
4.6 HDD Installation
The UPC-12A/GM45 has one HDD slot inside the bottom panel for one 2.5” SATA HDD.
To install the HDD, follow the instructions below.
Step 1: Remove the HDD/battery access panel . The HDD/battery access panel is
secured to the rear panel with eight retention screws. Remove the retention
screws to remove the HDD/battery access panel.